DAY-GLO®  Non-Skid Tape  (SW-1915)
Our brilliant colored safely tape is now available for attracting attention.

Back to the top

EPOXO®  Series 2000  (SW-1980)
Used on U.S. Aircraft Carriers for non-slip surfaces of large areas. Fast and easy application ideal for ramps. Flint abrasive. One gallon and pint of hardener packed in each carton. USDA approved. Military Spec: MIL-D-23003.
Apply: (a) by trowel for normal skid resistance (two coats); (b) with brush for small areas (one coat); (c) with roller for super slip resistance (one coat).

This heavy-duty, two-component epoxy is formulated for maximum durability under heavy vehicular traffic. It's resistant to fire, acid, alkalis, solvent, grease, oil, salt water, detergent, alcohol, gasoline, hydraulic fluid, and weather. This makes it ideal for ramps, walkways, fork lift traffic, loading docks, ships, stadiums, garages, wherever you need an extremely tough and tenacious anti-slip surface.

EPOXO®  Series 3000  (SW-1986)
This new extra heavy-duty, chemically-resistant, two-component, 100%-solids, zero-V.O.C. (volatile organic chemicals), low-odor epoxy has the same incredible strength as our Series 2000. But its zero-V.O.C. formula makes it perfect for indoor use in food processing and preparation areas, meat packing and poultry operations, breweries, wineries, bakeries, bottling plants and hospitals or any confined, low-ventilation or spark-sensitive area.

Back to the top

FERROX®  (SW-1970)
Ferrox® is a one-part abrasive paint to give non-skid walking surfaces to walkways, deck, ramps, marinas, etc. Over 30 years of experience stand as strong testimonial to the effectiveness of this excellent product. Low V.O.C. (volatile organic chemicals). Non-slip floor coating.

Back to the top

HAZARD STRIP®  Non-Slip Tape  (SW-1918)
Clearly mark any hazard area with bright, anti-slip tread and tape. Meet OSHA safety requirements. Easily identifies caution areas, stairs, docks and ramps.

Back to the top

LUMA-GLOW®  Glow in the Dark Coating  (SW-1988)
Combines a glow-in-the-dark photo luminescent marker with a durable, high traction, anti-slip surface for areas where slippery floor problems. Glows for 4 hours in total darkness and recharges in minutes with exposure to an artificial light source. Luma-Glo® exceeds strict OSHA and ADA regulations for slip-resistant surfaces.

Back to the top

NITE-GLO®  Non-Skid Tape  (SW-1919)
The latest in the Peel-N-Stick safety tape is our phosphorescent glow-in-the-dark Nite-Glo®. Light is absorbed in daytime and then emits a low-level illumination in the dark.

Back to the top

SAFE-WALK®  Non-Slip Tape  (SW-1900)
Safe-Walk® grips like sandpaper to footwear. It is hard, durable and scuff resistant to oil, grease and water and can be applied to any clean, dry and smooth surface indoors or out. Special cleaner/prep is essential. It can also be applied to some rough surfaces with special Safe-Walk® Adhesive Sealer. Safe-Walk® is high friction textured sheet having a uniform coating of abrasive grit bonded with tough durable and environmentally resistant adhesive to a dimensionally stable plastic adhesive covered with a protective paper liner.

ACCESSORIES: 1. Cleaner Prep (AD-1903) 2. Floor Adhesive (AD-1901) 3. Hand Roller (SW-1904) 4. Edge Sealer (AD-1902)

Back to the top

SAFETY-WALK®  Conformable by 3M  (SW-1910)
For use on irregular surfaces. the grit is bonded to a conformable aluminum foil backing.

Back to the top

SCOTCH-TRED®  by 3M  (SW-1950)
Thousands of uses to provide friction on steering wheels, tool handles, under office machines, around swimming pools, showers, boat decks, etc. Made of dimensionally stable plastic film backing with resilient, low abrasive particles, bonded to it with synthetic rubber. The material is complete with liner-protected, pressure sensitive adhesive on one side.

Back to the top

SKID-X®  Non-Slip Coating  (SW-1985)
Low cost, medium grain, heavy duty epoxy floor coating prevents slips and falls. Applies instantly to any surface, damp or dry. Resistant to food acids, gasoline, sugars, oils, grease, detergent, alkalis, most solvents and hydraulic fluids, including skydrol. No special surface preparation except floor surfaces should be thoroughly cleaned. Applies easily with a short nap roller. Some uses include swimming pool decks, boat docks, showers and locker rooms. Low V.O.C. (volatile organic chemicals).

Back to the top

STUKKO®  Non-Slip Coating  (SW-1975)
Stukko® is a tough, single-pack, totally flexible, slip-resistant, waterproof protective polyurethane coating with self-contained recycled rubber granules for an attractive tough-textured finish. When exposed to atmospheric moisture, it undergoes a chemical curing process which changes it from a liquid to a tough polyurethane membrane. It has excellent abrasion and chemical resistance. It is also available in a smooth version without the rubber granules.
Stukko® is for indoor application, a special formulation is also available upon request for outdoor use. For enhanced UV protection a topcoat may be applied. Call for more information.
Stukko® will chemically bond to most clean and dry surfaces. These include, but are not limited to, concrete, wood, fiberglass, metal, rubber and sound-painted materials. Some metal and extremely porous surfaces may need to be primed. It can be applied by roller, brush or spray. A relatively smooth or rough surface can be obtained, depending on application technique.

Back to the top

TAC-TILE®  Warning Tile  (CT-1824)
Truncated dome detectable warning tile. Specify press-in-place or retrofit pavers.  This composite tile is UV stable and slip resistant. ADA approved.

Back to the top

TUB & SHOWER  SAFETY STRIPS  (SW-1951)
Helps prevent painful and costly accidents from slips and falls. Improves footing when entering, using and leaving tubs and showers. Ideal for hotel or motels, health clubs, lab emergency showers, etc.

Back to the top