ALERT-CHOCK®  (WC-2385)
Manufactured with a safety-orange insert on all two sides (Hi-lite strips). The purpose of the insert is to alert ramp attendants, even in very poor visible conditions as to the location of the chock. All purpose style suitable for aircraft and medium sized trucks. EPDM rubber compound offers outstanding weathering characteristics and resistance to petroleum fuels, including jet fuel. Multi-grooved gripping surface on all sides.

Back to the top

E.X.D.-CHOCK®  (WC-2378)
Molded of safety orange urethane. Unique microcellular construction gives chocks a "sponge-like" indention which will not damage tires if accidentally run over. The tough "skin" of the chock is water and abrasion resistant, and will "give" - up to 50% deflection @ 68 PSI - to conform to the shape of the tire. Diagonally ribbed, contoured surface for increase traction and rated up to (240 ton trucks). Also available with metal studs.

Back to the top

GIANT-CHOCK®  (WC-2379)
Molded of safety orange urethane. Unique microcellular construction gives chocks a "sponge-like" indention which will not damage tires if accidentally run over. The tough "skin" of the chock is water and abrasion resistant, and will "give" - up to 50% deflection @ 68 PSI - to conform to the shape of the tire. This chock is a popular asset to "off-road" vehicles - snow-plows, trailers, steam rollers and farm equipment. Lightweight, yet to heavy duty, contoured to fit truck tires, grips both tire and pavement. Built-in opening for ropes, chains, mounting brackets. Also available with metal studs.

Back to the top

JUNIOR-CHOCK®  (WC-2384)
Extruded EPDM rubber compound wedges are used extensively by leading paper mills to prevent movement of rolls during transport via train and tractor trailer. Heavy weight design and smooth surface prevents damage to outside layers and collapsibility of rolls.

Back to the top

MASTER-CHOCK®  (WC-2376)
Non-sparking aluminum suitable for usage in refineries, ammunition plants and similar flammable environments. Lightweight, high strength aluminum resists the effects of oil, salt, weather and corrosion plus "Gripper" cleats dig into soft or icy surfaces. Three angled "teeth" on underside for maximum road grip. Corrugated ribbed surface for gripping tires.

Back to the top

MINI-CHOCK®  (WC-2383)
Extruded EPDM rubber compound wedges are used extensively by leading paper mills to prevent movement of rolls during transport via train and tractor trailer. Grooved base contoured to provide positive "gripping" action. Smooth surface prevents damage to outside layers of rolls. Lightweight - easy of handling.

Back to the top

STEP-CHOCK®  (WC-2381)
Molded from a polyester and nylon-reinforced rubber tire compound, recommended for use with heavy trucks, trailers and road equipment. Rubber is highly resistant to abrasion, impacts, corrosion, weather and offers outstanding traction. Economical and long wearing chock and integral eye bolt for attaching chain. Will not harm soft macadam or blacktop driveways.

Back to the top

SUPER-CHOCK®  (WC-2380)
Laminated recycled tire rubber pads on 3/4" bolts and compressed between 1/4" steel plates designed smaller than rubber pads to prevent contact with tire and pavement. Ideal for heavy utility trucks and equipment, large cable rolls and buses. Positive grip - contoured to fit curvature of tire.

Back to the top

TRI-CHOCK®  (WC-2382)
EPDM rubber compound offers outstanding weathering characteristics and resistance to petroleum fuels, including jet fuel. Aggressive groove design for maximum traction in trucks, aircraft, large pipe, recreational vehicles and at most industrial dock locations. 

Back to the top

CHAIN ELECTRO-GALVANIZED  (HW-2296)
Weldless chain double loop. Low carbon steel.

Back to the top